Concrete Polishing Process: Getting That Gleam You Want on Your Floor

RebeccaPosted by

Polishing a concrete floor is a multi-step process that requires the use of the proper equipment and tools to attain top-quality results. The floor acquires a modern and sophisticated appearance. Concrete polishing Brisbane professionals provide is a fairly straightforward process and does not require plenty of time and physical labor. Polished concrete floors are common in commercial buildings. They are easy to maintain.

Procedures to follow when polishing a concrete floor:

Preparing

With the help of Mohs hardness pick, find out whether the surface is hard, soft, or medium. Results acquired will help you prepare for the polishing process well. Scrub the concrete using a bristle brush and a solution made of household detergent and warm water. If the surface has mold or stains, use a better cleanser. Chemicals such as TSP, Hydrogen peroxide, and ammonia can be better options.

Some of the materials used during concrete polishing in Brisbane’s residential projects can have a negative impact on your health. You will need to wear eye goggles and protective gloves before handling them. Purchase and mix the concrete crack filler as per the manufacturer’s instructions. Use it to repair any available cracks.

Grinding

During this stage, you will need to have a concrete grinder. You can either buy or rent one from hardware stores near you. If you are working on a big project, it is important to buy your own grinder. Processes like Brisbane concrete polishing can be risky. It is necessary to wear a helmet, gloves, ear plugs, and dust mask while working. Wear shoes with an excellent grip to avoid accidents caused by slipping, falling over, or sliding. Visit their website at Topline Floor Care

Use 40-grit grinding disc to remove stain and sealer from the surface. If there are no contaminants to be removed, start with the 80-grit disc. To get the best concrete polishing Brisbane contractors provide, you will need to use metal-bonded diamond discs. Pass the grinder over every part of the concrete surface every time you attach a new and less coarse disc.

Solidify the concrete by applying a chemical hardener over its surface. Before you do this, you will need to know the degree of hardness of the floor.  Apply the chemical according to the manufacturer’s directions. When surface dries, work over it with a 3000-grit disc until a high-gloss look is attained. Grinding the concrete can produce plenty of dust and debris. You can use a shop vac to vacuum the surface.

Buffing and sealing

Attach a functional burnishing pad to the grinder and pass it over the concrete surface. This must bluff and make it smooth. It is recommendable to use concrete sealers that are either solvent-based or water-based. They protect the surfaces from dirt, stains, and grease. Concrete polishing Brisbane contractors provide can improve the beauty and durability of your floor especially if two thin coats are applied.

Pass over the surface that has been sealed with the buffer or burnishing pad. You should work slowly to make sure that every part is covered. The floor should look glossy and smooth once you are done with the final pass. Do not use the polished concrete surface until the sealer dries. Referrals from friends can help you find concrete polishing Brisbane experts provide.

Leave a Reply

Your email address will not be published. Required fields are marked *